Can Venetian Plaster Be Painted Over?

Quick answer

Yes, you can paint over Venetian plaster, but you cannot apply emulsion straight to the surface. The wax sealant must be removed first, and a shellac-based primer (Zinsser BIN) applied before any paint will bond reliably. The exact process depends on whether you have polished marble plaster or textured Venetian plaster.

If you’ve moved into a property with Venetian plaster that isn’t to your taste, or you’ve grown tired of an existing installation, this guide covers everything you need to know. We’ll walk through both mathematical types, the material, and the material options available if you want to remove it altogether.


First: identify which type of Venetian plaster you have

The preparation and process differ depending on your finish. Before you buy any materials, check which of these applies:

  • Polished marble plaster — high-shine, smooth surface with a reflective quality. Usually sealed with a protective wax coating on completion.
  • Textured Venetian plaster — visible grain or deliberate surface texture. Coarser to the touch. No high-gloss sheen.

Still not sure? Run your hand across the surface. If it feels glassy-smooth and your fingers slide easily, it’s almost certainly polished marble plaster. If there’s grain, depth or irregularity to the surface, it’s textured.


How to paint over polished marble Venetian plaster

Polished marble plaster is the more straightforward of the two to paint over, largely because the surface is flat. The key challenge is the wax sealant; skip this stage, and nothing applied on top will stick properly.

Step 1 — Remove the wax sealant

Apply a proprietary wax cleaner/remover to the surface and work it in using microfibre cloths. If you have trade wipes to hand, these work well as a starting point. Once the wax is lifted, clean the wall thoroughly with a damp soapy cloth — this step is non-negotiable if you used trade wipes, as they contain paint-stripping agents that will cause adhesion failure if left on the surface.

Step 2 — Key the surface

Once clean and fully dry, lightly sand the wall to create a mechanical key. An orbital sander with dust extraction is the right tool here — the Mirka Deros is excellent for this purpose. You’re aiming for a uniformly scuffed surface that gives your primer something to grip.

Step 3 — Apply Zinsser BIN (2–3 coats)

This is the most important step in the whole process. Zinsser BIN is a red, shellac-based stain-blocking primer. It seals in the colour beneath and provides a surface that paint will actually bond to. Apply 2–3 coats, ensuring the original Venetian plaster colour is fully blocked out before moving on.

Important: Zinsser BIN is high-VOC. Ensure proper ventilation and wear appropriate PPE (gloves, eye protection, respirator with organic vapour cartridges) throughout.

Step 4 — Sand lightly, then apply your base coat

Once the BIN coats are dry, give the surface a light sand. Then apply a quality white base coat with good opacity — Johnstone’s Covaplus is a reliable and cost-effective choice. Follow with a face fill if needed, then your chosen top coat colour to finish.

Materials checklist for polished marble plaster:
Wax cleaner/remover · Microfibre cloths · Orbital sander + dust extraction · Zinsser BIN shellac primer · Johnstone’s Covaplus base coat · Face filler · Top coat emulsion · PPE (gloves, goggles, respirator)


How to paint over or remove textured Venetian plaster

Textured Venetian plaster requires a different approach because of the depth in the surface. You have three options depending on the result you want.

Option A — Paint over it and keep the texture

You can follow the polished plaster steps above. Be aware that paint will partially fill the texture and soften its definition — if the texture is an important part of the wall’s character, some of that will be lost. For a colour change where the texture isn’t precious to you, this is the fastest route.

Option B — Sand back and replaster for a smooth finish

If you want a completely smooth, paint-ready wall:

  1. Sand back using 80-grit paper on an orbital sander with dust extraction. Use 40-grit if the surface is heavily textured. Work until the wall is as flat as you can get it.
  2. Apply a high-grip primer to the sanded surface.
  3. Have the wall re-plastered with standard pink gypsum plaster. If the surface is still uneven after sanding, a float coat will be needed before the skim. This is a job for an experienced plasterer, as an incorrect float will make achieving a flat finish very difficult afterwards.
  4. Allow to dry fully. Apply a mist coat with diluted contract emulsion, then finish in your chosen colour.

Option C — Overboard it

If you’d rather avoid sanding entirely, 9mm plasterboard fixed over the existing wall is a clean and straightforward alternative. The board is then skimmed with multi-finish gypsum plaster in the usual way, giving you a fresh surface.

One thing to check before committing to this method: overboarding brings the wall face forward by approximately 12mm, which can partially cover your skirting board profile. On modern trim, this is usually easy to replace. On period properties with detailed mouldings, finding a matching replacement can be more difficult, measure and assess before you start.

If you would like to see how these finishes look and feel at full wall scale, visit our Venetian plaster showroom in Amersham, or read more about Venetian plaster installation in Amersham.


Which option is right for your wall?

Your situationRecommended approach
Polished plaster, want a colour changeStrip wax → key → Zinsser BIN → paint
Textured plaster, want to keep the textureFollow Option A — paint over it
Textured plaster, want a smooth wallOption B — sand back and replaster
Want the quickest possible fixOption C — overboard and skim
Unsure what type of plaster you haveGet a specialist to assess first

Frequently asked questions

Can you paint straight over Venetian plaster with emulsion?

No. Standard emulsion will not bond reliably to wax-sealed Venetian plaster and is very likely to peel, flake or blister over time. The wax layer must be fully removed first, and a shellac-based primer such as Zinsser BIN or Bullseye 123+ must be applied before any paint coat.

Do you need to remove Venetian plaster before painting?

No, you don’t need to remove it. In most cases, painting over it is the faster and more cost-effective option. Removal (by sanding or overboarding) is only necessary if you want a completely smooth finish, or if the plaster is damaged or delaminating.

How many coats of Zinsser BIN do I need over Venetian plaster?

Typically, 2–3 coats, depending on how deep or vivid the original Venetian plaster colour is. The goal is full colour block-out; if you can still see the original shade bleeding through, apply another coat before moving on to your base coat.

Can textured Venetian plaster be made smooth?

Yes, but not by painting alone. To achieve a smooth finish, the textured plaster must be sanded back (80–40 grit), and the wall replastered with standard gypsum plaster, or overboarded with 9mm plasterboard and skimmed. Both routes require a degree of skill and preparation to do correctly.

Is it better to paint over or replace Venetian plaster?

If the surface is sound and you’re happy to live with some texture, painting over it is faster and cheaper. If you want a completely fresh start, or the plaster is cracked or failing, a new installation or replastering is the better long-term investment. A specialist can assess your wall and advise the right route for your specific situation.

Can Signature Walls help with an existing Venetian plaster installation?

Yes. We regularly advise on and carry out work on existing installations — whether that’s removing, overboarding, or replacing with a new bespoke finish tailored to your tastes. Get in touch here, and we’ll call you back to discuss your options.


Want a fresh start instead?

If you’d rather replace the existing finish with something you’ll love, we install bespoke Venetian plaster, microcement and decorative finishes across Surrey, London and the Home Counties.

Book a consultation

Written by Peter Salter, Founder of Signature Walls, specialist installer of Venetian plaster, microcement and decorative finishes across Surrey, Kingston upon Thames, London and the Home Counties. Peter has worked on high-end residential and boutique commercial projects.

Visit the showroom

See Venetian plaster, polished plaster and microcement samples in person at our Amersham showroom, Sky House Design Centre, Raans Road, Amersham HP6 6FT. Our team can talk you through finishes, colours and next steps for your own space.

The showroom is open by appointment only: Monday to Thursday 9:00 to 17:00, Friday 9:00 to 15:00.

Book a showroom visit   Or call 0203 488 7578.

Comments are closed.