Forcrete Microcement Installers in Surrey
Cloudy, Tonal Variation, Completely Seamless
Why Choose Forcrete Microcement?
Forcrete is not just a surface coating. It is a multi-layer mineral system engineered for performance.
Key Benefits:
Fully seamless (no grout lines)
Suitable for bathrooms & wet rooms
Compatible with underfloor heating
Lightweight (can go over existing substrates)
Highly durable
Low maintenance
Contemporary, architectural aesthetic
Unlike tiles, Forcrete creates a monolithic finish that feels calm, modern and refined.
Typical Forcrete Microcement Installations
Forcrete Microcement Bathrooms in Surrey
We regularly install Forcrete microcement bathrooms throughout Surrey and London. Clients choose Forcrete for bathrooms because: It eliminates grout cleaning It creates a calm, seamless aesthetic It pairs beautifully with natural materials like cedar, stone and brass It works in contemporary and spa-inspired interiors You can view samples at our showroom in Amersham.
Forcrete Microcement for Steam Rooms & Spa Areas
Steam rooms require: Proper waterproofing Vapour resistance Specialist detailing We have extensive experience installing microcement in steam rooms and hammams, ensuring: Correct waterproof layers Proper curing times Manufacturer-approved detailing If you are planning a luxury spa or steam room project, speak to us early in the design phase.
Forcrete Microcement Floors – Seamless, Durable & Architectural
Forcrete microcement floors create a seamless, contemporary surface ideal for modern homes and design-led interiors across Surrey and London. Unlike traditional tile or stone flooring, microcement floors provide: A continuous, joint-free finish Compatibility with underfloor heating Reduced transitions between rooms A calm, architectural aesthetic Excellent durability when installed correctly
Forcrete Microcement Worktops & Kitchen Islands
Forcrete microcement worktops offer a refined, minimalist alternative to quartz, stone or laminate. Perfect for contemporary kitchens, islands and bespoke joinery, microcement creates a: Seamless wrapped finish Soft mineral texture Modern, monolithic aesthetic Fully customisable colour and tone Why Designers Choose Forcrete for Worktops Waterfall island detailing Wrapped edges with no visible joins Custom colour matching Subtle tactile texture Lighter weight than stone
Why Commission Signature Walls For your Microcement Installation?
Cover your walls the right way
Microcement, But How You Want It
Our approach to specifying the right systems, ensuring they are technically sound and suitable, ensures your surfaces receive the treatment they deserve.
If you want to push the boundaries of what is possible, then explore the more creative side.
We do things with Microcement that others can’t, or won’t.
We Install Microcement on Surfaces Others Avoid
Not every installer is comfortable working on complex substrates. Curved walls, staircases, structural movement zones, detailed joinery, or floors requiring reinforcement demand more than basic application skills. We regularly work on: Steam rooms & hammams Curved shower enclosures Staircases Full-height feature walls Complex floor plans Joinery-wrapped islands These environments require structural understanding, careful preparation and advanced detailing. Many installers focus only on flat bathroom walls — we specialise in architectural surfaces where precision matters.
True Seamless Design, Not Just “Microcement Walls”
Microcement should not feel like an applied product. It should feel integrated into the architecture. We design installations that flow across: Floors into walls Walls into ceilings Shower zones into vanity units Islands with wrapped waterfall edges Entire open-plan spaces Creating continuity across multiple surfaces requires planning from early design stages. We collaborate with designers, architects and project managers to ensure detailing is resolved before installation begins, not improvised on site. This is how you achieve a truly seamless interior, not just a coated surface.
Specified With Confidence. Installed With Precision.
As approved Forcrete microcement installers with a dedicated showroom in Amersham, we don’t just apply finishes, we specify complete surface systems. Every project begins with substrate assessment, technical detailing, and full system build-up planning. Designers and homeowners choose Signature Walls because they know the finish will not only look exceptional on day one, but perform for years to come. This is microcement, delivered properly.
Installed to Perform, Not Just to Look Good
Microcement is often marketed purely for its aesthetic. We approach it as a performance system. In certain environments, particularly steam rooms, commercial spaces or patient-facing interiors, installation must meet higher technical expectations. Our process can incorporate: Waterproof membrane systems Vapour-resistant detailing Reinforced base structures ISO-compliant topcoats where specified Full installation documentation This ensures that your microcement installation performs as well as it looks, particularly in demanding environments.
One of the biggest concerns with microcement is improper installation. We follow a fully documented meticulous installation process to manufacturer specifications.
Our Forcrete Installation Process (Belts & Braces Approach)
01 Substrate assessment
Every successful microcement installation begins with a thorough substrate assessment. We inspect the existing surface for movement, cracking, moisture levels and structural integrity. Microcement is only as strong as what sits beneath it, so identifying potential weaknesses at this stage prevents future issues such as cracking or delamination.
02 Structural Preparation
Once assessed, the substrate is mechanically prepared to ensure proper adhesion. This may include sanding, priming, levelling compounds or reinforcing weak areas. We do not apply decorative finishes over unstable surfaces, correct preparation is essential for long-term durability.
03 Waterproof Membrane (Where Required)
In bathrooms, wet rooms and steam environments, a waterproof membrane is installed before the microcement system begins. This creates a secure barrier beneath the decorative finish, protecting the structure behind the surface and ensuring the installation performs correctly in high-moisture areas.
04 Reinforcement Mesh
A specialist fibreglass reinforcement mesh is embedded within the base layers of the system. This step increases tensile strength and helps distribute minor movement across the surface. Reinforcement is particularly important on floors, joins, and areas prone to stress.
05 Base Coats
Multiple base coats are applied to build strength and structure within the system. These layers form the foundation of the finish, ensuring proper adhesion and uniformity. Each coat is allowed to cure correctly before the next stage begins, rushing this process is one of the most common causes of failure in poorly installed microcement.
06 Decorative Finish Layers
The decorative layers are hand-applied to achieve the chosen texture and aesthetic. Whether smooth and refined or softly clouded and mineral, this stage defines the character of the surface. Our applicators are trained decorative finish specialists, ensuring consistency, balance and control in tone and movement.
07 Sealer System
Once the decorative layers have cured, a specialist sealer system is applied. This seals the microcement and protects the finish with stain resistance, durability and the chosen sheen level. Waterproofing is built into each layer of the system, so we do not rely on the sealer for it. The type of sealer used will vary depending on whether the surface is a floor, wall, bathroom or worktop.
08 Quality Control & Documentation
Every stage of our installation process is photographed and quality checked. This provides transparency, traceability and reassurance that your Forcrete microcement has been installed to manufacturer specification. Microcement is a high-performance system, but only when installed correctly.
successful projects & satisfied customers.
Where We Install Forcrete Microcement
We install Forcrete Microcement across:
Wet rooms & showers
Steam rooms & spa areas
Feature walls
Commercial interiors
Surrey
We cover all areas across Surrey, including Guildford, Woking, Reigate, Redhill, Dorking, Epsom, Esher, Weybridge, Cobham, Leatherhead, Virginia Water, Farnham, Englefield Green, Haslemere, Camberley, and beyond.
London
Our London coverage spans all 32 boroughs and the City of London, including Kensington, Chelsea, Mayfair, Notting Hill, Fulham, Richmond, Wimbledon, Putney, Clapham, Battersea, Canary Wharf, Vauxhall, Hampstead, and all surrounding areas.
Home Counties
We regularly travel to work across the Home Counties, including Kent, Essex, Hertfordshire, Berkshire, Buckinghamshire, and Oxfordshire. If you are unsure whether we cover your area, please get in touch. We are happy to discuss.
Frequently Asked Questions
Is Forcrete microcement waterproof?
Yes, when installed correctly Forcrete Microcement is waterproof with each layer.
Can Forcrete go over tiles?
In many cases, yes.
Subject to substrate condition and preparation.
Is Forcrete suitable for underfloor heating?
Yes. We provide professional installation for a wide range of underfloor heating scenarios.
How much does Forcrete microcement cost?
Costs vary depending on complexity, detailing and substrate condition. Contact us for an investment guide.
Bathrooms start from £5,500 + VAT, floors from £5,800 + VAT (a minimum project charge) and walls from £3,500 + VAT (a minimum project charge). A site survey always confirms the written quote.
Do you install Forcrete in London?
Yes,we work across Surrey, London and surrounding counties.
Is Forcrete slip rated?
Absolutely. We can provide exact slip rating figures for the system being specified.
Can we use Forcrete in a commercial space?
Yes, Forcrete is perfect for commercial spaces due to its robust and hard wearing nature. Check out some of our portfolio.
Do you work with interior designers and architects?
Yes. Signature Walls regularly works alongside interior designers, architects and design-led homeowners who want to bring their creative visions to life.
What colours and finishes can I choose with Forcrete?
Does Forcrete rely on the sealer to be waterproof?
See It. Touch It. Specify It Properly.
Choosing microcement is an architectural decision, not just a material choice.
Our Amersham showroom showcases Forcrete microcement across walls, floors, and bathrooms, alongside complementary plaster finishes. We walk you through substrate preparation, system build-up, and design integration so you can make decisions with clarity and confidence.
No guesswork. No Instagram assumptions.
Arrange your microcement showroom visit and start your specification properly
Last updated 7 November 2026
Every Forcrete installation we complete is a premium, belts-and-braces system: waterproof with each layer, reinforced with fibreglass mesh on floors, and fully customisable with 42 standard colours, colour matching to designer paint libraries and finishes from polished to matte. Bathrooms start from £5,500 + VAT, floors from £5,800 + VAT and walls from £3,500 + VAT, with a site survey confirming every written quote. Read more about microcement bathrooms, microcement floors, microcement investment or applying microcement over tiles, or get in touch for an initial estimate.
Recent bathroom projects: Thames Ditton, Banstead and Wallington.
